In this tutorial, i am going to apply VLAN on packet tracer. Let us create a topology with one switch and multiple hosts like in the figure below. if we
VLAN or Virtual Local Area Network is a phenomenon which is used to logically separate or combine a network. It is used to configured one or more devices,
Here, we will see communication enabled between PCs via Router in Packet Tracer. So, for this we need two PCs, a router ,and two cross over cables to connect
A Broadcast Domain is a smaller piece of a computer network, with boundaries defined by routers and other higher-layer devices. Computers connected to the same switch or repeater are part of a
In an IPv4 network, the hosts can communicate one of three ways: Unicast – The process of sending a packet from one host to an individual host Broadcast – The
In this tutorial i will discuss about difference between Switch and Hub (Switch vs Hub). Before Switch were introduced, Hub were standard device to interconnecting PC or another
The Physical layer is concerned with network media and signaling. This layer produces the representation and groupings of bits as voltages, radio frequencies, or light pulses. Various standards
Baseband refers to the original frequency range of a transmission signal before it is converted, or modulated, to a different frequency range. For example, an audio signal may
Broadband internet speeds let users take advantage of technologies including videoconferencing via computers, voice calls over computers and streaming high quality audio and video. The major types of
A repeater is a device similar to the Hub, but has additional features. It also works in the Physical layer. The repeaters are used in places where amplification